IB503P-HTTPD -  Debem  Türkiye Satışı

Pneumatic diaphragm pump, BOXER 81, PMTTPD Connection size 1 "ext. MATERIALS Housing: pp Membranes: Santoprene + PTFE valve / seat valve: PTFE / PP TECHNICAL PARAMETERS Max. pressure. cg. air [bar] 7 bar * Max. Trabi [0C] max. + 650S Sample setpoint - 35 l / min at 10 m of water and compressed air 5 bar Consump. in x-in servant. point [Nl / min] approx. 370 * Trabi = Temp. pumped. fluid + Temp. environment. ** The cited data flow, pressure, density and viscosity are max. values. Flows relate to water Temp = 18 ° C and measured at open outlet of the pump (without NCRA. Hose)

(Ex-Stecker, 3-polig)

(Ex-Steckdose, 3-polig)

consisting of universal motor and pump station 10 Pieces of Universal motor JP-180, 230V, 50Hz, 600W, IP24 A - On / Off switch, 5m cable with plug, Overcurrent protection switch with Unterspannungsausloessung 10 pieces of pump station polypropylene, 1000mm long, 41mm diameter sealless execution, Tauchrohrlaenge 1000mm, Outside - dip tube - diameter 41mm, Hastelloy - Shaft 2.4610 Connection thread G 1 1/4 hose connection 1 " 20 meters PVC - hose, 1 "(10x2meters) 20 pieces hose clamps, stainless steel 10 pieces nozzle, polypropylene, 1 " 10 pieces Wandaufhaengung, painted steel

FLANGED NUT

Innen- und Außenmembrane Hytrel/PTFE für obige Pumpe

T30 PNEUMATIC EXCHANGER

FOODBOXER 30 AISI 316 MEM.HY+PT/PT/INOX/PT

BOXER 50 PP MEM.HY+PT/INOX/INOX/EPDM, SUPPLY WITH INSTRUCTIONS MANUAL

POMPA

Yedek Parça Makine Bilgisi JP-800.91 PMTTPT (Serien-Nr. SDB 72105)

(Set Universalmotor JP-400 -EX, 230 Volt, 50 Hz, 550 Watt, IP 54: Pumpwerk, 2 St. Schlaucheinbindungen, 2 mtr. Vielzweckchemieschlauch, Zapfpistole, Potentialausgleichskabelset)

(Druckluft-Membranpumpe JP-800.150 (DEBEM BOXER 100), Gehäuse: Polypropylen, Membranen: HYtrel+PTFE, Kugeln: PTFE , Kugelsitze: PP, O-Ringe: PTFE)

(Druckluft-Membranpumpe JP-800.150 (DEBEM BOXER 100), 1", Gehäuse: Aluminium, Membanen: HYtrel+PTFE, Kugeln: PTFE, Kugelsitze: PE-UHMW, O-Ringe: PTFE)

Flow rate max. 220 l / min at 7 bar Housing: PP Diaphragm: Hytrel (air side) + PTFE (medium side) Balls: PTFE Ball seats: PP O-rings: PTFE

Druckluftmembranpumpe JP-800.5 CONDUCT 5 l/min max. 7 bar, Zulassung für Ex-Zone 1 Gehäuse: PP + Kohlefaser Membrane: NBR (Luftseite) / PTFE (Mediumseite) Kugeln: Pyrex (Glas) Kugelsitze: PPSV (Ryton) O-Ringe: PTFE

Förderleistung max. 50 l/ min bei 7 bar Gehäuse: PP Membrane: Hytrel (Luftseite) + PTFE (Mediumsseite) Kugeln: PTFE Kugelsitze: PP O-Ringe: Viton

2 " Approval for Ex Zone 2 PP housing      Diaphragm: Hytrel (airside) / PTFE (medium)      Balls: Stainless steel      Ball seats: PP      O rings: EPDM (Debem Pump IB502P-HTTPD)

Hava diyaframlı pompa

Förderleistung max. 100 l/ min bei 7 bar

Lippendichtung O-Ringe aus Viton mit Drehstrommotor IE Klasse 1, 230/400V, 0,37 KW, 0,5 PS, 2800 Upm. Nicht selbstansaugend!

SANTRİFÜJ POMPA YATAY